CPI GTR180 Service Manual page 79

CPI MOTOR GTR180
IX.DRIVE AND DRIVEN PULLEYS & KICK STARTER
Disassemble the flange bolts.
Disassemble the Left crankcase cover.
Remove:
1. Flange bolts [A]
2. Left crank case cover [B]
Disassemble the gasket & dowel pins.
Remove:
1. Dowel pins. [A]
Disassemble four screws.
Disassemble the left crankcase cover plate.
Remove:
1. Screws [A]
Disassemble the start idle gear comp.
《9 -5 》