CPI GTR180 Service Manual page 61

CPI MOTOR GTR180
VII.CYLINDER HEAD & CAM SHAFT REMOVAL
LOOSEN THE TAPPET ADJUSTING NUT
Use thickness meter to measure and adjust the valve gap.
Adjusting till the standard, fix the bolt and tighten the nut.
STANDARD：
In valve 0.06 mm。
Ex valve 0.08 mm。
Install the cylinder head gasket & dowel pins.
Install:
1.Dowel pins. [A]
2.Cylinder head gasket [B]
Install cylinder head cover& two special bolts.
Install:
1.Special bolts [A]
《 7-15 》