CPI GTR180 Service Manual page 54

CPI MOTOR GTR180
VII.CYLINDER HEAD & CAM SHAFT REMOVAL
CYLINDER HEAD REMOVAL
Remove three flange bolts cylinder head.
Remove:
1. Flange bolts [A]
Remove two intake pipe bolts.
Remove:
1. Flange bolts. [A]
Remove the intake pipe comp. & carburetor insulator.
Remove:
1. Intake pipe comp. [A]
2. Carburetor insulator [B]
Remove the flange bolt.
Remove:
1. Flange bolt.[A]
《 7-8 》