CPI GTR180 Service Manual page 113

CPI MOTOR GTR180
X.ELECTRIC SYSTEM
Circuit of Starting System
Inspection of Starting Relay
Open main switch
Pull the brake lever
Push the starting button
The relay is on normal function if hear the "Ka Ka" sound.
Remove the luggage
Open the wire of negative pole (-) of battery
Open the wire of positive pole (+) of battery and
the starting motor wire from the big terminal of
starting relay.
Open the power connector of starting relay
Connect an Ohmmeter between the big terminal of relay
Also connect white/red wire to positive pole (+) of
battery, blue/white wire to the negative pole (-) of
battery.
Inspect if it is with passageway between the big
terminal of relay.
Change the starting relay if no good circuit.
《 10-19 》