The Model Name And Ip Address Do Not Appear In The Epsonnet Config Dialog Box; An Extra Account Is Generated When Using The Dial-Up Network; Problems Specific To Your Network Environment; Windows Me/98 Environment - Epson 3250 Network Manual

The Model Name and IP Address do not appear in the EpsonNet Config
dialog box.
Cause
If the valid IP address is not set, the items
indicated in the dialog box mentioned
above may not appear.

An extra account is generated when using the dial-up network.

Cause
NetWare is set to Enable even though you
are not using NetWare.
How to acquire an IP address.
To acquire your IP address, you need to apply to the NIC (Network Information Center) in your country.

Problems Specific to Your Network Environment

Windows Me/98 environment

A dial-up connection dialog box appears when printing with TCP/IP via EpsonNet Print.
Cause
You have selected a phone line or modem
(for Internet Explorer 4.0x) for the Internet
connection.
What to do
Set a valid IP address.
Refresh the status by selecting Refresh from the View menu.
Increase the length of time before a timeout. To do this, select
Options from the Tool menu, and then select Timeout. Note that
doing so can cause EpsonNet Config to run more slowly.
What to do
Set NetWare to Disable on the NetWare screen of EpsonNet Config
with Web Browser.
What to do
Printing ends normally after you cancel this dialog box, but the
message appears every time you print. Connect to the Internet using
a local area network or start a dial-up network manually.
EPSON Network Guide
Troubleshooting 117