The Model Name And Ip Address Do Not Appear In The Epsonnet Config Dialog Box; An Extra Account Is Generated When Using The Dial-Up Network; Problems Specific To Your Network Environment; Windows Me/98 Environment - Epson EPL-6200 Network Manual

Network Guide
The Model Name and IP Address do not appear in the EpsonNet
Config dialog box.
Cause
If the valid IP address is not set, the
items indicated in the dialog box
mentioned above may not appear.

An extra account is generated when using the dial-up network.

Cause
NetWare is set to Enable even
though you are not using NetWare.
How to acquire an IP address.
To acquire your IP address, you need to apply to the NIC (Network Information Center) in your
country.

Problems Specific to Your Network Environment

Windows Me/98 environment

A dial-up connection dialog box appears when printing with TCP/IP via
EpsonNet Print.
Cause
You have selected a phone line or
modem (for Internet Explorer 4.0x)
for the Internet connection.
What to do
Set a valid IP address.
Refresh the status by selecting Refresh from the View
menu.
Increase the length of time before a timeout. To do this,
select Options from the Tool menu, and then select
Timeout. Note that doing so can cause EpsonNet Config
to run more slowly.
What to do
Set NetWare to Disable on the NetWare screen of
EpsonNet Config with Web Browser.
What to do
Printing ends normally after you cancel this dialog box,
but the message appears every time you print. Connect
to the Internet using a local area network or start a
dial-up network manually.
162
Troubleshooting