Network Setup Menu; Instructions On Using A Dial-Up Router - Epson printer Network Manual

13. Press the Left button twice to exit the control panel menus.
14. Turn off your printer and then turn it back on. Be sure to wait until the initialization is complete.
Print a network status sheet to confirm the new IP address.
Note:
❏ You must first set the IP address before using EpsonNet Config with Web Browser.
❏ See the User's Guide for more information about settings on the printer's control panel.

Network Setup Menu

These items are used to make network settings on the printer's control panel.
Note:
The available settings vary depending on your printer model.
Item
NETWORK SETUP
IP ADDRESS SETTING*
IP*
SM*
GW*
AppleTalk*
MS Network*
Bonjour*
INIT NETWORK
SETTING*
* Available only whenEnable is selected for NETWORK SETUP.

Instructions on Using a Dial-Up Router

This section describes instructions on using a dial-up router.
Settings
Disable, Enable
Auto, Panel, PING
0.0.0.0 to 255.255.255.254
0.0.0.0 to 255.255.255.255
0.0.0.0 to 255.255.255.255
On, Off
On, Off
On, Off
EXECUTE
EPSON Network Guide
Tips for Administrator 132