Configuring For Netware Using Epsonnet Winassist; Setting The Printer On Client Workstations - Epson Color Laser Printer Owner's Manual

Configuring for NetWare using EpsonNet
WinAssist
Follow the steps below if you want to use the printer in IPX
network.
Note:
Be sure that the one of the following clients is installed on your computer:
Novell Client 32, Novell IntranetWare Client, or Novell Client.
1. Turn on your printer.
2. From any NetWare client, log in to the target NetWare server
as an ADMIN.
3. Run EpsonNet WinAssist from the Start menu. See "Setting
an IP Address Using EpsonNet WinAssist" on page 39 for
details.
If the IP address of the printer is already assigned, you can
use EpsonNet WebAssist too. See "NetWare" on page 223 for
details.

Setting the printer on client workstations

After configuring the print server, set up the printer on client
workstations.
Installing printers automatically
1. Run the Novell Printer Manager from Windows. If you are
running Windows Me/98/95/2000/NT, run:
\PUBLIC\WIN32\NWPMW32.EXE
2. In the Novell Printer Manager dialog, select New from the
Printer menu.
Settings for NetWare Server
6
6
6
6
6
6
6
6
6
6
6
6
157