Setting an IP address to the Printer Using
EpsonNet Easy Setup
You can set an IP address to the Internal Print Server, using
EpsonNet WinAssist Easy Setup.
Note:
The computer to use for the following steps must be in the same segment
as the printer.
1. Insert the software CD-ROM shipped with the printer in the
CD-ROM drive.
2. The EPSON Installation Program starts automatically.
If the EPSON Installation Program does not start
automatically, click Start and then Run. Type D:\EPSETUP
and then click OK. (Substitute the appropriate letter for your
CD-ROM drive if necessary.)
3. Double-click Run EpsonNet WinAssist Easy Setup.
When the EpsonNet WinAssist Easy Setup dialog box
appears, click Next.
4. Read the Usage Agreement and click Next.
5. Select the target printer and click Next.
Easy Setup for Windows Me/98/95
2
2
2
2
2
2
2
2
2
2
2
2
19