Table of Contents
Advertisement
Chapter 5
Tips for Administrator
Setting an IP Address on the Printer's Control Panel
After connecting the printer to the network, you need to set the IP address for the network interface.
For information on using the printer control panel to enter the IP address, subnet mask, and default
gateway, see the printer User's Guide.
Secure Communication Using IPsec, Access Control, SSL, and IEEE 802.1X
Some printers may not support secure communications using IPsec, Access Control, SSL and
IEEE802.1X. For information on whether your printer supports these secure communications
features, see the printer User's Guide.
Data format
Supported operating
systems
IPsec protocol
IPsec is a protocol that is suitable for securing IP communication by encrypting the data or by
authenticating client users in a network. To use this function, make the necessary settings on your
printer using Remote Manager. Security settings on the client computers on the network are also
required. For more information, see "Secure Communications (IPsec/Access Control)" on
page 50.
Access Control
Access control function allows you to restrict network access to the printer.
❏ Restrict access to the printer from specified client users only
IPsec
Encrypted data
Windows 8.1/8/7/Vista
Epson
Network Guide
Access Control
Unencrypted data
All operating systems supported by
this product
Tips for Administrator
48
Advertisement
Table of Contents
