Setting The Built-In Buzzer (For Model With A Built-In Buzzer)43 - Epson C31CE94061N Technical Reference Manual

Setting the Built-in Buzzer
(for Model with a Built-in Buzzer)
For specifications with a built-in buzzer, a pulse output is sent to drawer kick connector pin 5 to beep the
buzzer.
When using a cash drawer, connect a cash drawer operated by pin 2.
If you have to use a cash drawer operated by pin 5, change the DIP switch settings for the buzzer circuit.
For details, see "Setting the DIP Switches" - "Setting Procedure" on page
DIP Switch for Buzzer Circuit
DIP
Specified connector pin
switch
1 Drawer kick connector pin 2
2 Drawer kick connector pin 5
Do not set the buzzer to beep for pin numbers used for drawer operations. The buzzer and the
cash drawer cannot be operated by one pulse signal.
53.
ON OFF
Buzzer beeps. Buzzer does not
beep.
Buzzer beeps. Buzzer does not
beep.
Chapter 2 Setup
Default
setting
ON
2
OFF
43