Oce Arizona 250 GT User Manual page 62

How to Switch the Printer On and Off
How to Power ON
Ensure that the blue AC power plug is properly seated; and
1.
Turn on the AC power On/Off switch.
2.
[38]
[38] AC Power Switch
If it is not already on, turn on the power of the Control Station LCD display.
3.
During the boot-up procedure, the printer operating system is loaded and the User
Interface software is automatically started. The software displays a splash screen
followed by the initial Job Control module screen. The initialization is complete
when the top left panel of the display shows "Ready".
Attention: After powering the printer On, leave it running continuously, even
when at idle. Failure to leave the printer powered on may result in ink draining
out of the ink reservoirs.
62 Chapter 5 How to Operate the Arizona 250 GT