Oce Arizona 250 GT User Manual page 79

How to Handle Media
Thermal Expansion of Media
When imaging on media that will expand when subjected to heat (e.g., styrene or
Plexiglas, etc.), don't wedge the media by butting other material against it as this
may cause the media to buckle. Also if multiple pieces of the media are used, allow
enough space between the pieces to allow for thermal expansion. Placing tape on
the table prior to laying down the media will prevent ink from being imaged onto
the table. Finally, if you overprint on media that expands when heat is applied, we
recommend that you group the desired image with a preceding image so the printer
is a consistent temperature when starting to print the desired image.
79