Oce Arizona 250 GT User Manual page 93

3:= MORPE Maintenance Operator Recoverable Error Intervention can allow
printer to continue.
5:= MRE Machine Recoverable Error Some intervention is required to allow
printer to continue. Recycling power may recover.
7:= ORE Operator Recoverable Error Operator must do something or press a
button to continue.
9:= WRN Warning Advises operator that a condition exists that will cause the
printer to stop if intervention is not performed. (e.g., low ink)
All errors are logged by the printer except fatal errors. This is because fatal errors
power off the system.
Sample Error
01-3-10 Carriage UV System - Park Side Lamp won't strike
In this example, 01 is the CAS code for the Carriage UV System, 3 means it is
operator-recoverable, while 10 simply means it is the 10th error identified with the
UV lamp system (not the 10th occurence, just an assigned sequential number).
Basic Troubleshooting
Troubleshooting helps you locate the source of errors and fix common problems that
can arise during printing.
Troubleshooting Areas:
Printer behavior
Print quality
Data transfer
Example 1
If There is No Power
Is the printer connected to a working power source?
The service should be a dedicated supply that is not susceptible to voltage
fluctuations. This service must be provided via an independent, double pole, fused
circuit breaker and a circuit ground (computer grade) located near the machine. The
service should meet all local and national standards for this type of installation. The
circuit breaker should be clearly labeled, indicating the On and Off positions, such
as '1' for On and '0' for Off. A suitable air gap should be maintained for safe electrical
isolation when in the Off position. The printer relies on this service for primary
branch protection. If the printer is without power, check the local supply voltage and
verify that it is set correctly.
Troubleshooting Overview
93