Oce Arizona 250 GT User Manual page 89

Illustration
[48]
[48] Remove the Quick-Release Coupler
How To Change an Ink Bag
Attention: For Personal Safety, it is recommended that the operator wear rubber
gloves, a protective apron, and safety glasses with side shields when handling
inks.
Open the clear plastic door on the Ink Station.
1.
Identify the the ink bag to be replaced.
2.
Press the quick-release coupler button at the bottom corner of the ink bag.
3.
Unhook the bag from the top of the ink station.
4.
Replace with a new ink bag of the same color.
5.
Push the quick-release coupler at the bottom corner of the new bag into place.
6.
Note: If you place a bag in the wrong ink station (for example, yellow ink in the
black ink station) the User Interface display will show an error message and the
printer will not print until the correct bag is installed.
How to Change Ink Bags
89