Oce Arizona 250 GT User Manual page 48

Print Job Control Module
2) Printer Status Panel
The printer status panel is in the top right corner of the display. It shows the last four
lines of the printer log that contains printer status information and error messages.
To see more of the log file, double-click on the panel.
To the right of the status panel are two buttons:
Pause/Resume print button. This button can be used to pause or resume printing.
Ink Level Indicators. Click the button to open an ink subsystem status dialog that
displays ink-related information.
3) Command Toolbar
The printer toolbar contains icons that allow you to interact with the printer (listed
here in displayed order). Note that the buttons have a checked and unchecked state.
[18]
[34]
[34] Command Toolbar
Print job
Hold job
Cancel job
Delete job
Flatbed
Media Thick-
ness
48 Chapter 4 How to Navigate the User Interface
This command can do the following actions depending on con-
text:
Activates a selected inactive job.
Un-holds a held job.
Un-holds an job that had an error currently.
The command can do following actions depending on context:
Puts an active job on hold.
Waits until the printer finishes a currently printing copy and
puts the job on hold.
The command can do following actions depending on context:
Deactivates a selected active job.
Cancels a currently printing job.
Deletes a job from the printer. Only an Inactive job can be delet-
ed. In order to delete an Active job, the job has to be deactivated
first using Cancel command.
Process flatbed jobs toggle command - Allows printer to process
flatbed jobs. Note: Other job types will be added at a later date.
Enter or confirm the thickness of the media. The printer will au-
tomatically adjust the carriage height to media thickness and also
the print gap. Media thickness confirmation is required only for
the first copy of a print job, unless it is changed during printing.
If the media thickness value is changed while printing, confirma-
tion is requested before printing the next copy.