Oce Arizona 250 GT User Manual page 44

Operator Interface Hardware
Status of Beacon Lights States
The status light indicate the following printer status to the operator.
[15]
[15] Status Lights
Beacon Status Light Definition
Green Off
Green On
Emergency Stop Effects
Note: There are three Emergency Stop buttons, one on the control station podium
and one on each end of the gantry. The AC power On/Off switch can also function as
an emergency stop. There are more details on the Emergency stops in the Interlock
section (see 'Interlock Safety System' on page
Activating an Emergency Stop will disable the following:
Carriage motion
Gantry motion
UV curing lamps
Ink pumps
Thermal fluid (coolant) pump
Thermal fluid heater
Purge pump
Purge valve
Printheads jetting
44 Chapter 4 How to Navigate the User Interface
Printer interlock system or
the emergency stop switches
have been triggered. No mo-
tion can be initiated
Printer is functional and
ready to initiate motion.
Possible Conditions
Maintenance station panel
has been opened or one the
emergency stop switches
has been triggered.
24).