Oce Arizona 250 GT User Manual page 21

[7]
[7] Exposure Controls
Engineer- Local exhaust ventilation or other engineering controls are normally
ing required when handling or using this product to avoid overexposure.
Measures It is recommended that facilities storing or using this material be
equipped with an eyewash and safety shower.
[8]
[8] Personal Protection
Area Strategy
Respiratory Follow a respiratory protection program that meets 29 CFR
Protection 1910.134 and ANSI Z88.2 requirements whenever work place con-
ditions warrant the use of a respirator. Respiratory protection may
be required in addition to ventilation depending upon conditions of
use.
Eye Wear safety glasses with side shields when handling this product.
Protection Wear additional eye protection such as chemical splash goggles
and/or face shield when the possibility exists for eye contact with
splashing or spraying liquid, or airborne material. Do not wear con-
tact lenses. Have an eye wash station available.
Skin Avoid skin contact by wearing chemically resistant gloves, an apron
Protection and other protective equipment depending upon conditions of use.
Inspect gloves for chemical break-through and replace at regular in-
tervals. Clean protective equipment regularly. Wash hands and other
exposed areas with mild soap and water before eating, drinking, and
when leaving work. Use of protective coveralls and long sleeves is
recommended.
Gloves Wear impervious material.
Disposal of UV Ink
[9]
[9] Disposal Considerations
Disposal Dispose in accordance with Federal, State, Provincial and Local reg-
Methods ulations. Material may be compatible with industrial waste incinera-
tion or inclusion in a fuel blending program. This characterization is
subject to approval by your waste management contractor. This ma-
terial should be recycled if possible.
Safety Guidelines for Ink Materials
21