Hints And Tips - Oce Arizona 250 GT User Manual

Hints and Tips

Hints and Tips
Introduction
The following recommendations are based on our experience with the Arizona 250
GT printer. They are offered as starting points or suggestions for dealing with various
situations. Since this information is subject to change please check our web site at
http://www.dgs.oce.com/PrinterSupport/Arizona250GT_Customer/ for the current
list of "Application Hints and Tips". The hints are tips are grouped into three
categories: Maintenance, Printing, and Color and Profiling.
Maintenance Hints and Tips
[25]
Situation
Routine
Maintenance
Printhead
Maintenance
Spare Ink Filters The printer will indicate when it is time to change ink filters
Spare Lamp
cartridge
126 Appendix A Application Hints and Tips
Hint and Tips
For optimal printer performance always perform the recom-
mended preventative maintenance i.e. the daily, weekly,
monthly etc. Refer to the
page 98) for details.
Always suction the excess ink from the print heads after purg-
ing, and then run a nozzle check to ensure all the print head
nozzles are firing properly. See
on page 100).
(either in six months or after 11 bags of ink). It is a good idea
to stock at least one or more spare filters.
When the lamps are nearing end of life, a spare UV Lamp car-
tridge can be ordered to minimize the down time when a lamp
needs to be replaced.
(see 'Maintenance Guidelines' on
(see 'Printhead Maintenance'