Oce Arizona 250 GT User Manual page 99

Operator Maintenance Schedule
The Arizona 250 GT printer requires regular maintenance. Periodic cleaning should
be scheduled for some components during the week. A few minutes spent cleaning
ensures the highest quality prints. Several areas require maintenance to ensure the
highest print quality, and the printer design gives you easy access to all these areas.
Diligent application of the maintenance schedule ensures optimum performance
from your printer.
The following table provides our recommended maintenance schedule. This is a
minimum requirement and some procedures may need to be done with greater
frequency. Each of the procedures is explained in detail in this section in the order
of frequency required as presented in this table.
[24]
[24] Maintenance Frequency
Procedure
Printhead Maintenance
Remove Ink from Table
Empty the Waste Tray
Swab Printheads
Clean Carriage Underside
Clean UV Lamp Filter
Refill Coolant
Clean Gantry Rails
Change Ink Filter
Change UV Lamp
Print a Nozzle Check
Reprint the Ruler
Linear Encoders
Frequency
Daily or as needed
Daily or as needed
When ink is visible in maintenance station
Weekly or as needed
Weekly or as needed
Weekly or as needed
Weekly or as needed
Monthly or mas needed
After 11 bags of ink or if color is out
When curing is insufficient
When print quality is insufficient or banding
occurs
When the ruler become unreadable
Every year
Maintenance Guidelines
99