Oce Arizona 250 GT User Manual page 67

Check Configuration
Click on Test to verify that the computer and printer are in communication.
If the Test was successful, a verification message is displayed to indicate a Valid IP
address was found.
Correction
If no valid IP address is found, check that the host name of the printer is correct and
1.
that port 9100 was selected.
Run the Test again.
2.
Result
When a Valid IP address for the printer is verified, click on OK to complete the
configuration of the communication link between ProductionHouse and the Arizona
250 GT printer.
How to Install the Onyx Printer Driver
67