Oce Arizona 250 GT User Manual page 7

Responsibilities of the Operator
The operator of the Arizona 250 GT must be properly trained. Océ provides training
for the operator in the use of hardware and software at the time of installation. It is
the customer's responsibility to ensure that only properly trained personnel operate
the printer. Operators must be fully versed in the operation of Onyx
ProductionHouse
ProductionHouse
available; contact Onyx Graphics Corporation for more information:
http://www.onyxgfx.com/support_training.html
The operator or other trained personnel are expected to handle all user maintenance
as detailed in the User Guide, and also replacement of consumable parts (except print
heads). If your site has a technician in charge of printer maintenance, that person is
the optimal candidate. While any trained operator may perform routine maintenance,
the best maintenance results from familiarity with the printer's internal operation and
history.
The printer requires some daily maintenance. Periodic cleaning must be scheduled
for some components on a weekly basis. A few minutes spent cleaning ensures the
highest quality prints. Several areas require maintenance to ensure the highest print
quality, and the printer design gives you easy access to all these areas.
It is the responsibility of the operator to try to eliminate simple problems before
calling a service representative. But knowing when to call for service is also
important. An untrained operator must not attempt to service the printer as this may
cause further damage. When you have determined that a service call is required, call
as soon as possible. See the Maintenance section for more details.
Responsibilities of the Arizona 250 GT Service Technician
Field service technicians must have Océ Display Graphics Systems Arizona 250 GT
service training. The service technician is responsible for all repairs, upgrading and
modification requested by the customer or mandated by the Océ Display Graphics
Systems Service and Support Group. Service personnel are furnished with proper
tools for the installation and maintenance of the printer. In addition to the tools and
custom kits, each engineer will have basic tools for proper maintenance and
servicing.
Statement of Foreseen Use
The Arizona 250 GT flatbed inkjet printer uses piezo printing technology and UV
curable inks to produce outdoor-durable output. It can print directly onto rigid and
flexible substrates up to 2.5 m (98.4") x 1.25 (49.2") and up to 0.48 mm (1.89")
thickness. The printer holds substrates stationary while the print head assembly
moves across to create the print, eliminating image skew problems associated with
rigid stock feed systems.
®
. For any operator unfamiliar with its operation, Onyx
®
training is required. On-site or off-site training courses are
Preface
7