Rotax 912 Series Maintenance Manual page 55

3) Visual inspection
General note The scope of a visual inspection generally includes, but is not necessarily
limited to, the following.
Moving
Normal operating condition, accurate alignment, leak-tightness, cleanli-
parts
ness, ease of movement, adjustment, mechanical stress, travel, catching,
extreme wear, cracks, corrosion, deformation and other visually evident
damage.
Parts
Secure seating, surface condition, cleanliness, deformation, cracks in
welding seams or due to material fatigue or stress, corrosion and other
visually evident damage.
Fuel-, Air- and Oil
Cracks, dents, kinks, required flexibility, collapsed lines/hoses, abrasion,
lines
cleanliness, secure seating and other visually evident damage.
Wiring General cleanliness; loose, corroded or broken terminals; chafed, broken
or worn insulation; secure seating, heat damage and other visually evi-
dent damage.
Screws and Nuts Surface damage, secure seating, locking wire, securing paint and other
visually evident damage.
Filter
Filters and screens must be inspected for contamination and potential
blockages, cleaned and replaced as required.
Effectivity: 912 Series
Edition 3 / Rev. 0
BRP-Powertrain
MAINTENANCE MANUAL
05-20-00
page 7
September 01/2012