Step
7
8
3.5)
Non compliance with the coolant specification
General note
Step
1
2
3
4
Effectivity: 912 Series
Edition 3 / Rev. 1
BRP-Powertrain
MAINTENANCE MANUAL
Inspect all systems for correct functioning.
Detailed inspection of affected engine components.
Use only coolant as recommended in the current Op-
NOTICE
WARNUNG
erators Manual and SI-912-016 "Selection of
suitable operation fluids", current issue.
Non compliance with the coolant specification
When a different coolant as the former one (conventional coolant) is used,
then the coolant system has to be flushed.
See chapt. 12-20-00 section:
Fill in with new coolant
See chapt. 12-10-00 section: 3.1).
Re-install the radiator cap.
NOTE:
Run engine for a minute and replenish as required.
Procedure
Procedure
9.3)
05-50-00
page 12
January 01/2013