Rotax 912 Series Maintenance Manual page 62

Points of Inspection
Inspect all oil lines for damage, leakage, hardening
from heat, porosity, security of connections and at-
tachments. Verify routing is free of kinks and restric-
tions.
Inspect all fuel lines for damage, leakage, hardening
from heat, porosity, security connections and attach-
ments. Verify routing is free of kinks and restrictions.
In the case of steel fuel lines (912 F, 912 S and/or op-
tional), also check for any cracks and/or scuffing
marks.
Inspect the wiring and its connections for secure fit,
damage and signs of wear.
Check the magnetic plug.
Check the compression by the differential pressure
method.
Test pressure________hPa (psi)
Pressure drop (% or fraction)
Cyl # 1 2
bar/psi
Inspect engine suspension and fasteners for secure
fit, including damage from heat, deformation, cracks.
Inspect suspension and fasteners for secure fit, in-
cluding damage from heat, deformation, cracks.
Effectivity: 912 Series
Edition 3 / Rev. 1
BRP-Powertrain
MAINTENANCE MANUAL
2.) Magnetic plug
3.) Compression check
every 200 hr.
3 4
4.) Checking the engine suspension
5.) Checking the air intake system
Interval
Operating hours Reference
as
100 hr.
indicated
X 12-20-00
sec. 4)
X 12-20-00
sec. 4)
X 12-20-00
sec. 13.1)
X 12-20-00
sec. 12)
12-20-00
sec. 5)
X 12-20-00
sec. 3.1)
X
Chapter
Signature
05-20-00
page 14
January 01/2013