Remote Controller Compliance Version; Used With The Dji Focus - dji INSPIRE 1 PRO User Manual

INSPIRE 1 PRO User Manual

Remote Controller Compliance Version

The remote controller is compliant with both CE and FCC requirements.

Used with the DJI Focus

DJI Focus is fully compatible with the Zenmuse X5 series gimbal and camera. No calibration is required
when using the Focus with the Zenmuse X5 camera.
Connection
To allow communication between the two devices, connect the communication port on the Focus remote
controller to the CAN Bus port on the Inspire 1 remote controller using the dedicated CAN Bus cable.
Ensure that the Zenmuse X5 camera is set in AF mode.
Refer to "DJI FOCUS User Manual" for more information.
36
©
2015 DJI. All Rights Reserved.