dji INSPIRE 1 PRO User Manual page 30

INSPIRE 1 PRO User Manual
2. Lower: The landing gear will lower to its lowest position for landing.
Do not raise the landing gear when the aircraft is on the ground. Ensure the landing gear is
lowered before landing.
RTH button
Press and hold this button to start the Return to Home (RTH) procedure. The LED around the RTH Button
will blink white to indicate the aircraft is entering RTH mode. The aircraft will then return to the last recorded
Home Point. Press this button again to cancel the RTH procedure and regain the control of the aircraft.
Connecting Mobile Device
Tilt the Mobile Device Holder to the desired position. Press the button on the side of the Mobile Device Holder
to release the clamp, and then place your mobile device into the clamp. Adjust the clamp to secure your
mobile device. Then connect your mobile device to the remote controller with a USB cable. Plug one end of
the cable into your mobile device, and the other end into the USB port on the back of the remote controller.
30
©
2015 DJI. All Rights Reserved.