dji INSPIRE 1 PRO User Manual page 22

Hide thumbs Also See for INSPIRE 1 PRO:
Table of Contents

Advertisement

INSPIRE 1 PRO User Manual
2. Using the Intelligent Flight Battery in extremely low temperature environments (those with air
temperatures below -10℃) is not recommended. When flying in environments with temperatures
between 5℃ and -10℃, the Intelligent Flight Battery should be able to achieve the appropriate voltage
levels (above 4.2 V), but it is recommended that you apply the included insulation sticker to the battery
in order to prevent a rapid drop in temperatures.
3. If the DJI GO app displays the "Critical Low Battery Level Warning" when flying in low temperature
environments, stop flying and land the aircraft immediately. You will still be able to control the aircraft's
movement when this warning is triggered.
4. Store the Intelligent Flight Battery in a room temperature environment and ensure that its temperature
exceeds 5℃ before using it in the low temperature environment.
5. When using the Inspire 1 Pro in a low temperature environment, begin by allowing the aircraft to hover
at a low altitude, for approximately one minute, to heat the battery.
6. To ensure optimum performance, keep the Intelligent Flight Battery's core temperature above 20℃
when in use.
In cold environments, insert the battery into the battery compartment and allow the aircraft to
warm up for approximately 1-2 minutes before taking off.
Checking the battery level
The Battery Level Indicators display how much remaining power the battery has. When the battery is
powered off, press the Power Button once. The Battery Level Indicators will light up to display the current
battery level. See below for details.
The Battery Level Indicators will also show the current battery level during charging and
discharging. The indicators are defined below.
: LED is on.
: LED is off.
Battery Level
LED1
LED2
Battery life
The battery life indicates how many more times the battery can be discharged and recharged before
it must be replaced. When the battery is powered off, press and hold the Power Button for 5 seconds
22
©
2015 DJI. All Rights Reserved.
: LED is flashing.
LED3
LED4
Battery Level
87.5%~100%
75%~87.5%
62.5%~75%
50%~62.5%
37.5%~50%
25%~37.5%
12.5%~25%
0%~12.5%
=0%

Advertisement

Table of Contents
loading

Table of Contents