dji INSPIRE 1 PRO User Manual page 23

to check the battery life. The Battery Level Indicators will light up and/or blink as described below for 2
seconds:
Battery Life
LED1 LED2
When battery life reaches 0%, it can no longer be used.
For more information about the battery, launch DJI GO app and check the information under the
battery tab.
Charging the Intelligent Flight Battery
1. Connect Battery Charger to a power source (100-240V 50/60Hz).
2. Open the Protection Cap and connect the Intelligent Flight Battery to the Battery Charger. If the battery
level is above 95%, turn on the battery before charging.
3. The Battery Level Indicator will display the current battery level during charging.
4. The Intelligent Flight Battery is fully charged when Battery Level Indicators are all off.
5. Air cool the Intelligent Flight Battery after each flight. Allow its temperature to drop to room temperature
before storing it for an extended period.
Do not charge the Intelligent Flight Battery and remote controller with standard charger (model:
A14-100P1A) at the same time, otherwise the charger may overheat.
Always turn off the battery before inserting it or removing it from the Inspire 1 Pro. Never insert
or remove a battery when it is powered on.
Intelligent Flight Battery
LED3 LED4 Battery Life
90%~100%
80%~90%
70%~80%
60%~70%
50%~60%
40%~50%
30%~40%
20%~30%
below 20%
Charger
INSPIRE 1 PRO User Manual
Power Outlet
©
2015 DJI. All Rights Reserved.
23