dji INSPIRE 1 PRO User Manual page 42

INSPIRE 1 PRO User Manual
Gimbal Operation Modes
Three Gimbal operation modes are available. Switch between the different operation modes on the
Camera page of the DJI GO App. Note that your mobile device must be connected to the remote
controller for changes to take effect. Refer to the table below for details:
Pitch
Follow Mode
FPV Mode
Free Mode
Re-alignment
Gimbal motor error may occur in these situations: (1) Gimbal is placed on uneven ground. (2)
Gimbal has received an excessive external force, e.g. a collision. Please take off from flat, open
ground and protect the gimbal after powering up.
Flying in heavy fog or cloud may make the gimbal wet, leading to a temporary failure. The
gimbal will recover when it dries out.
42
©
2015 DJI. All Rights Reserved.
The angle between Gimbal's orientation and aircraft's nose remains
constant at all times. One user alone can control the pitch motion of the
Gimbal, but a second user is required to control the pan motion using a
second remote controller.
The Gimbal will lock to the movements of the aircraft to provide a First-
Person-View flying experience.
The Gimbal's motion is independent of the aircraft's orientation. One user
alone can control the pitch motion of the Gimbal, but a second user is
required to control the pan motion using a second remote controller.
Tap to force the Gimbal orientation to re-align with aircraft's orientation
by panning from gimbal's current orientation. Pitch angle will remain
unchanged during the re-alignment.
Pan Roll