dji INSPIRE 1 PRO User Manual page 16

INSPIRE 1 PRO User Manual
Low Battery RTH
The low battery level failsafe is triggered when the DJI Intelligent Flight Battery is depleted to a point that
may affect the safe return of the aircraft. Users are advised to return home or land the aircraft immediately
when these warnings are shown. DJI GO app will advise user to return the aircraft to the Home Point
when low battery warning is triggered. Aircraft will automatically return to the Home Point if no action is
taken after 10 seconds countdown. User can cancel the RTH by pressing once on the RTH button. The
thresholds for these warnings are automatically determined based on the current aircraft altitude and its
distance from the Home Point.
Aircraft will land automatically if the current battery level can only support the aircraft to land to the ground
from the current altitude. User can use the remote controller to control the aircraft's orientation during the
landing process.
The Battery Level Indicator is displayed in the DJI GO app, and is described below
Critical Low battery level
warning(Red)
Battery Level
Remark
Warning
The battery
Low battery
power is low.
level warning
Please land the
aircraft.
Critical Low The aircraft
battery level must land
warning immediately.
Estimated
Estimated
remaining flight
remaining
based on current
flight time
battery level.
16
©
2015 DJI. All Rights Reserved.
Sufficient battery
level(Green)
Low battery
level warning
Power requires
to return home
Battery level indicator
Aircraft Status
Indicator
Tap "Go-home" to have
the aircraft return to the
Home point and land
automatically, or "Cancel" to
Aircraft status
resume normal flight. If no
indicator blinks
action is taken, the aircraft
RED slowly.
will automatically go home
and land after 10 seconds.
Remote controller will sound
an alarm.
The DJI GO app screen will
Aircraft status
flash red and aircraft starts to
indicator blinks
descend. Remote controller
RED quickly.
will sound an alarm.
N/A
Remaining flight time
DJI GO app
N/A
Flight Instructions
Fly the aircraft
back and land
it as soon as
possible, then
stop the motors
and replace the
battery.
The aircraft
will begin to
descend and land
automatically.
N/A