dji INSPIRE 1 PRO User Manual page 32

INSPIRE 1 PRO User Manual
Use the gimbal dial on the remote controller to control the pitch movement of the camera in the
single remote controller mode, however, you cannot control the pan movement of the camera.
Setting Up Dual Remote Controllers Mode
Dual Remote Controllers mode is disabled by default. Users must enable this feature on the "Master"
remote controller by through the DJI GO app. Follow the steps below for setup:
"Master" Remote Controller:
1. Connect the remote controller to your mobile device and launch the DJI GO app.
2. Go to the Camera page, and tap
3. Tap "Set RC Status" to enable Master-and-Slave mode.
4. Select "Master" in the "Set RC Status" section to set the remote controller as "Master" remote controller.
RC Control Settings
Master and Slave
Set RC Status
RC Name
Slave RC List
5. Enter the connection password for the "Slave" remote controller.
"Slave" Remote Controller:
1. Tap "Search for Master Controller" to search the "Master" remote controller.
RC Control Setting
Master and Slave
Set RC Status
RC Name
Master RC List
32
©
2015 DJI. All Rights Reserved.
to enter the remote controller settings window.
RC Settings
Connection Password
T12254
RC Settings
S88642
Request Control
Search for Master Controller
OFF Master
Slave
1234
OFF Master
Slave