Return To Home (Rth) - dji INSPIRE 1 PRO User Manual

Aircraft Status Indicator Description
Normal
Red, Green and Yellow Flash
Alternatively
Green and Yellow Flash Alternatively Aircraft warming up
Green Flashes Slowly
X2 Green Flashes Twice
Yellow Flashes Slowly
Warning
Fast Yellow Flashing
Slow Red Flashing
Fast Red Flashing
Red Flashing Alternatively
— Solid Red
Red and Yellow Flash Alternatively

Return to Home (RTH)

The Return to Home (RTH) brings the aircraft back to the last recorded Home Point. There are three cases
that will trigger RTH procedure; they are Smart RTH, Low Battery RTH and Failsafe RTH.
Home Point
Smart RTH
Using the RTH button on the remote controller (refer to "RTH button" on P30 for more information) or the
RTH button in the DJI GO app when GPS is available to enables smart RTH. The aircraft return to the
latest recorded Home Point, you may control the aircraft's orientation to avoid collision during the Smart
RTH. Press the Smart RTH button once to start the process, press the Smart RTH button again to exit
Smart RTH and regain the control.
GPS
The Home Point is the location at which your aircraft takes off when the
GPS signal is strong. You can view the GPS signal strength through
the GPS icon (
setting, the Home Point will be updated to your current position as you
move around and when the Aircraft Status Indicator blinks green.
Power on and self-check
Safe to Fly (P mode with GPS and Vision Positioning)
Safe to Fly (P mode with Vision Positioning but without GPS)
Safe to Fly (A mode but No GPS and Vision Positioning)
Remote Controller Signal Lost
Low Battery Warning
Critical Low Battery Warning
IMU Error
Critical Error
Compass Calibration Required
Description
). If you are using the Dynamic Home Point
INSPIRE 1 PRO User Manual
©
2015 DJI. All Rights Reserved.
15