dji Inspire 1 Quick Start Manual
Hide thumbs Also See for Inspire 1:

Advertisement

INSPIRE 1
Quick Start Guide
V2.2

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Inspire 1 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for dji Inspire 1

  • Page 1 INSPIRE 1 Quick Start Guide V2.2...
  • Page 2 INSPIRE 1 The Inspire 1 is a professional aerial filmmaking and photography platform that is ready to fly right out of the box. Featuring an onboard camera equipped with a 20mm lens and 3-axis stabilized gimbal, it shoots sharp 12mp stills and stable video at up to 4K.
  • Page 3: Remote Controller

    Remote Controller The maximum transmission distance of the Inspire 1 remote controller is 2km*. The remote controller also allows you to control the landing gear or activate Return to Home with a tap. Other buttons allow instant photo capture, video recording, picture review and gimbal control.
  • Page 4: Calibrating The Compass

    Be very careful when flying 14,700 feet (4,500 meters) or more above sea level as the battery and aircraft performance may be reduced. ● The Inspire 1’s compass and GPS will not work in Polar Regions. The aircraft will auto switch to ATTI Mode and use the VPS for positioning. ●...
  • Page 5 Appendix Aircraft (Model: T600) ● Weight 2845 g (Battery and Propellers Included, Zenmuse X3 Excluded) Weight 3060 g (Battery, Propellers and Zenmuse X3 Included) Maximum Weight of Payload 3500 g Max Tilt Angle 35° Max Ascent Speed 5 m/s Max Descent Speed 4 m/s Max Speed 20 m/s (ATTI mode, no wind)
  • Page 6 The Intelligent Flight Battery must be fully charged before using it for the first time. ● Only use the official DJI Inspire 1 charger for your Intelligent Flight Battery and remote controller. Power off the Intelligent Flight Battery before ●...
  • Page 7: Preparing The Remote Controller

    On the Master RC, launch the DJI GO Press the button to app and enter Camera View. Tap release the clamp. the top of your screen to bring up the RC Settings.
  • Page 8: Gimbal And Camera

    The stick mode is set to Mode 2 by default (left hand throttle). The left stick controls the aircraft's elevation and heading. The right stick controls the aircraft's forward, backward and lateral movements. The gimbal dial controls camera tilt. Right Stick Gimbal Dial Left Stick You can change the stick mode in the DJI GO app. ●...
  • Page 9 10. Flight Before taking off, ensure the Aircraft Status Bar in the DJI GO app Safe to Fly (GPS) indicates ‘Safe to Fly (GPS)’. In the DJI GO App: Auto Takeoff Auto Landing The aircraft will take off and hover at The aircraft will land vertically and stop its an altitude of 4 feet (1.2 meters).
  • Page 10 INSPIRE 1 Creativity Unleashed www.dji.com...

Table of Contents