Remote Controller Status Led - dji INSPIRE 1 PRO User Manual

Remote controller cannot link to the aircraft if the remote controller is set as "Slave". Meanwhile,
the "Slave" remote controller cannot control the orientation of the aircraft. Reset the remote
controller to "Master" in DJI GO app if you wish to link the remote controller to the aircraft.
2. Search the "Master" remote controller in the surrounding area in the "Request Control" section.
RC Control Settings
RC Control Settings
Master and Slave
Set RC Status
Master and Slave
RC Name
Set RC Status
RC Name
Master RC List
RC Control Settings
Master and Slave
3. Select the "Master" remote controller from the "Master RC List" and input the connection password to
connect to the desired "Master" remote controller.
Master RC List
Set RC Status
T12254
RC Name
Master RC List
Slave RC List

Remote Controller Status LED

The Status LED reflects connection status between Remote Controller and aircraft. The RTH LED shows
the Return to Home status of the aircraft. The table below contains details on these indicators.
Status LED
S88642
Search for Master Controller
S88642
T12254
T12254
RC Settings
RC Settings
OFF
Request Control
RC Settings
Request Control
Search for Master Controller
Connection Password
INSPIRE 1 PRO User Manual
Master
Slave
OFF
OFF Master
1234
RTH LED
©
2015 DJI. All Rights Reserved.
Master
Slav
Slave
33