dji INSPIRE 1 PRO User Manual page 53

GPS Signal Strong
Zone Restriction
Motors will not start.
If the aircraft enters the
No-fly Zone
restricted area in A mode but
P mode activates the aircraft
will automatically descend to
land then stop its motors after
landing.
If the aircraft enters the
Restricted-
restricted area in A mode but P
altitude flight
mode activates, it will descend
zone
to a safe altitude and hover 15
feet below the safe altitude.
Warning zone
No flight restriction applies, but
there will be warning message.
Free zone
No restrictions.
Semi-automatic descent: All stick commands are available except the throttle stick command
during the descent and landing process. Motors will stop automatically after landing.
When flying in the safety zone, aircraft status indicator will blink red quickly and continue for 3
seconds, then switch to indicate current flying status and continue for 5 seconds at which point
it will switch back to red blinking.
For safety reasons, please do not fly close to airports, highways, railway stations, railway lines,
city centers and other special areas. Try to ensure the aircraft is visible.
Blinking Green
DJI GO App Prompt
Warning: You are in a No-fly
zone. Take off prohibited.
Warning: You are in a No-fly
zone, automatic landing has
begun. (If you are within 1.5 mile
radius)
Warning: You are in a restricted
zone. Descending to safe
altitude. (If you are between the
range of 1.5 mile and 5 mile
radius)
Warning: You are in a restricted
zone. Max flight height restricted
to between 10.5m and 120m. Fly
Cautiously.
Warning: You are approaching a
restricted zone, Fly Cautiously.
None.
INSPIRE 1 PRO User Manual
Aircraft
Status
Indicator
Red flashing
None.
©
2015 DJI. All Rights Reserved.
53