Dynamic Home Point - dji INSPIRE 1 PRO User Manual

Hide thumbs Also See for INSPIRE 1 PRO:

User manual (71 pages)

Quick start manual (11 pages)

Quick start manual (10 pages)

Table Of Contents

Table of Contents

When the critical battery level warning activates and the aircraft is descending to land

automatically, you may push the throttle upward to hover the aircraft and navigate it to a more

appropriate location for landing.

Color zones and markers on the battery level indicator reflect estimated remaining flight time

and are adjusted automatically, according to the aircraft's current status.

Failsafe RTH

Failsafe RTH is activated automatically if remote controller signal (including video relay signal) is lost for

more than 3 seconds provided that Home Point has been successfully recorded and compass is working

normally. Return home process may be interrupted and the operator can regain control over the aircraft if

a remote controller signal is resumed.

Failsafe Illustration

1 Record Home Point (HP)

Blinking Green

4 Signal Lost Lasts 3secs.

Fast Blinking Yellow

Aircraft automatically descends and lands if RTH is triggered when the aircraft flies within a 20

meter (65 feet) radius of the Home Point.

Aircraft cannot avoid obstruction during the Failsafe RTH, therefore it is important to set an

reasonable Failsafe altitude before each flight. Launch the DJI GO app and enter "Camera"

view and select "MODE" to set the Failsafe altitude.

Aircraft will stop ascending and immediately return to the Home Point if you move the throttle

stick if the aircraft reaches 20 m altitudes or beyond during Failsafe.