Headlight Flasher - Mitsubishi LANCER Owner's Manual

Features and controls

Headlight flasher

You can flash the high beams by pulling the lever gently
toward you (2). The lights will go back to normal when you let
go. While the high beam is on, you will see a blue light on the
instrument panel.
NOTE
You can flash the high beams by pulling the lever toward
you, even if the combination headlights and dimmer
switch is off.
If you turn the lights off with the headlights set to high-
beam illumination, the headlights are automatically
returned to their low-beam setting when the combination
3
headlights and dimmer switch is next turned to the "
position.
3-226
Welcome light (except for vehicles with the rear
seat arm rest)
N00550000198
This function turns on the front side-marker and parking lights
for about 30 seconds after the UNLOCK button (A) on the
remote control transmitter is pressed when the combination
headlights and dimmer switch is in the "OFF" or "AUTO"
position (for vehicles equipped with the automatic light con-
trol). On vehicles equipped with the automatic light control,
the welcome light function will operate only when it is dark
outside the vehicle.
"
N00563200051