Mitsubishi LANCER Owner's Manual page 329

Features and controls
Vehicle with rain sensor
The windshield wipers can be operated with the ignition switch
in the "ON" or "ACC" position.
If the blades are frozen to the windshield or rear window, do
not operate the wipers until the ice has melted and the blades
are freed, otherwise the wiper motor may be damaged.
3
MIST- Misting function
The wipers will operate once.
OFF- Off
AUTO- Auto-wiper control
Rain sensor
The wipers will automatically operate depending on the
amount of moisture on the windshield.
LO- Slow
HI- Fast
3-234
Rain sensor
(if so equipped)
Can only be used when the ignition switch is "ON" position.
If the lever is put in the "AUTO" position, the rain sensor (B)
will detect the extent of rain (or snow, other moisture, dust,
etc.) and the wipers will operate automatically.
Keep the lever in the "OFF" position if the windshield is dirty
and the weather is dry.
Wiper operation under these conditions can scratch the wind-
shield and damage the wipers.