Mitsubishi LANCER Owner's Manual page 437

Comfort controls
Operating the air conditioning system (automatic
mode)
In normal conditions, use the system in the AUTO mode and
5
follow these procedures:
1. Set the blower speed selection dial to the "AUTO" posi-
tion.
2. Select the temperature control dial to the desired tempera-
ture. The temperature can be set within a range of around
61 to 89. The temperature will increase as the dial is
turned to the right.
3. Set the mode selection dial to the "AUTO" position.
The vents (except between "
side air, blower speed, and ON/OFF of air conditioning will be
controlled automatically.
5-38
N00731700345
" and " "), recirculation/out-
NOTE
Set the temperature at about 75 under normal conditions.
While the engine coolant temperature is low, the tempera-
ture of the air from the heater will be cool/cold until the
engine warms up, even if you have selected warm air with
the dial. To prevent the windshield and windows from
fogging up, the vent mode will be changed to "
" " and the blower speed will be reduced.
" or