Mitsubishi LANCER Owner's Manual page 470

7. "STORED" will be displayed for 2 seconds, the code will
be changed and the satellite radio will return to the LOCK
setting mode.
NOTE
The SKIP settings, LOCK settings and lock cancellation
code are stored in memory. Disconnecting the battery
cable will erase these settings.
(The lock cancellation code will reset to the default fac-
tory setting: "1111.")
To reset the lock cancellation code
In case you forget the code, it is possible to reset the code to the
factory setting (1111).
1. With the audio power OFF, press the PWR switch (2) and
the TUNE/SOUND switch (7) at the same time.
The display will show "CODE INITIAL."
2. Press the TUNE/SOUND switch (7). "YES" will be dis-
played. To reset the code, press the TUNE/SOUND
switch (7) again. "STORED" will be shown for 2 seconds
and the code will be reset.
If you do not want to reset the code, turn the
TUNE/SOUND switch (7) to display "CANCEL" and
then press the TUNE/SOUND switch (7) again.
Text message
You can change what is shown on the display when the satellite
radio tunes into a channel.
Press the DISP button (4) repeatedly to change to your desired
display mode. The order is: Channel Number + Channel Name
→ Category Name → Artist Name → Song Title → Composer
Name
NOTE
Category name can also displayed by pressing the PTY
button (8).
The display can show up to 12 characters. If there are
more than 12 characters, press the PAGE button (3) to
view the next 12 characters.
Comfort controls
5
5-71