Mitsubishi LANCER Owner's Manual page 277

Features and controls
Outside temperature display screen
Shows the temperature outside the vehicle.
NOTE
The display setting can be changed to the preferred units
(°F or °C).
Refer to "Changing the function settings (With ignition
switch in the "ON" position)" on page 3-187.
Depending on factors such as the driving conditions, the
displayed temperature may vary from the actual outside
temperature.
Twin Clutch SST control mode display screen
3
(Twin Clutch SST)
The operation status of the Twin Clutch SST control mode is
displayed. Refer to "Twin Clutch SST control mode" on page
3-117.
ACD control mode display screen
The operation status of the ACD control mode is displayed.
Refer to "ACD control mode" on page 3-132.
3-182
Fuel remaining display screen
N00556500094
Shows the amount of fuel remaining.
Type 1
N00545100029
!
(if so equipped)
N00545900030
NOTE
Type 2
CAUTION
Running out of gas could damage the catalytic con-
verter. If the warning display appears, refuel as soon
as possible.
It may take several seconds to stabilize the display after
refilling the tank.
If fuel is added with the ignition switch in the "ON" posi-
tion, the remaining fuel display may indicate an incorrect
fuel level.
N00556600125