Mitsubishi LANCER Owner's Manual page 140

Answerback function
Setting of the horn, turn signal lights and buzzer of the keyless
entry system answerback function can be changed as required.
This is done with the key removed from the ignition switch.
NOTE
The answerback function does not operate when the key is
in the ignition switch or any door is opened.
Horn deactivation/reactivation
The horn answerback function can be set to the following three
conditions.
Each time the horn answerback function is set, a chime will
sound to tell you the condition of the answerback function.
Number of
chimes
One chime The horn will not sound.
Two chimes The horn will sound.
The horn will sound if the LOCK button is
Four chimes
pressed twice quickly.
1. Turn the ignition switch to the "LOCK" position. If you
started the engine with the key, remove the key from the
ignition switch.
2. Open the driver's door and turn the combination head-
lights and dimmer switch to the "OFF" position.
3. Press the LOCK button (1) for 4 to 10 seconds and press
the UNLOCK button (2) during this time.
N00544500039
Condition
4. Release in sequence the UNLOCK and LOCK buttons
within 10 seconds of pressing the UNLOCK button in step
3.
NOTE
On a vehicle equipped with a Mitsubishi Multi-Communi-
cation System, the functions can be adjusted on the
screen. For details, refer to a separate operation manual.
Changing the setting of the turn signal lights answerback
function
The turn signal lights answerback function can be set to the fol-
lowing seven conditions.
Each time the turn signal lights answerback function is set, a
chime will sound to tell you the condition of the answerback
function.
Number of chimes
To lock
One chime One flash
Two chimes One flash
Three chimes No flash
Four chimes Two flashes
Five chimes No flash
Six chimes Two flashes
Seven chimes No flash
Features and controls
Condition
To unlock
Two flashes
No flash
Two flashes
One flash
One flash
No flash
No flash
3-45
3