Mitsubishi LANCER Owner's Manual page 269

Features and controls
System check screen
When the ignition switch is turned to the "ON" position, the
system check screen is displayed for about 4 seconds. If there
is no fault, information screen (when the ignition switch is
"ON") is displayed.
If there is a fault, the screen changes to warning display. Refer
to "Warning display list (when the ignition switch is "ON"
position)" on page 3-205.
Type 1
3
NOTE
The system check screen display varies depending on
your equipment.
3-174
Type 2
Service reminder
When the time for periodic inspection arrives, the warning dis-
play is displayed for a few seconds after the screen that is ini-
tially displayed when the ignition switch is turned "ON". Refer
to "Service reminder" on page 3-184.
Type 1
Type 2
ACD control mode display screen
The operation status of the ACD control mode is displayed.
Refer to "ACD control mode" on page 3-132.
(if so equipped)
N00545900027