Mitsubishi LANCER Owner's Manual page 213

Features and controls
Twin Clutch SST control mode switch
When the ignition switch is set to the "ON" position, operate
the Twin Clutch SST control mode switch (A) to change the
control mode.
3
When the engine is started, the control mode is automatically
set to the "Normal" mode. Use the following procedures to
change the control mode.
3-118
To shift from "Normal" mode to "Sport" mode
While the vehicle is stopped or being driven, push the Twin
N00540300068
Clutch SST control mode switch forward.
To shift from "Sport" mode to "Normal" mode
While the vehicle is stopped or being driven, push the Twin
Clutch SST control mode switch rearward.
NOTE
If the Twin Clutch SST control mode switch is continu-
ously pressed after a control mode has been selected, an
erroneous operation prevention function operates and the
control mode is automatically set to the "Normal" mode.
If you would like to select a control mode again, return the
ignition switch to the "ACC" or "LOCK" position and
restart the engine. Then, push the Twin Clutch SST con-
trol mode switch.