Mitsubishi LANCER Owner's Manual page 247

Features and controls
NOTE
If the cruise control is on when the ignition switch is
turned to "OFF" position, cruise control will turn on auto-
matically and the "CRUISE" control indicator will illumi-
nate the next time you start the engine.
If the battery voltage is insufficient, the memory data for
the cruise control will be erased. As a result, the
"CRUISE" control indicator may not come on when you
restart the engine. If this happens, press the "ON OFF"
switch once again to activate the cruise control.
2. Confirm that the Twin Clutch SST control mode is set to
"Normal" (on vehicles with Twin Clutch SST).
3
Refer to "Twin Clutch SST control mode" on page 3-117.
NOTE
The cruising speed cannot be set when the Twin Clutch
SST control mode is set to "Sport" mode.
3-152
3. Accelerate or decelerate to your desired speed, then press
and release the "COAST SET" switch (B) when the
"CRUISE" indicator light is illuminated. The vehicle will
then maintain the desired speed.
Type 1
Type 2
NOTE
The speed when you released the "COAST SET" switch
will be set as the cruising speed.