Mitsubishi LANCER Owner's Manual page 134

3. Insert the emergency key into the ignition switch.
4. Insert the F.A.S.T.-key into the emergency key.
5. Press and hold the brake pedal down with your right foot.
6. Press and hold the clutch pedal all the way down (manual
transaxle).
NOTE
For models equipped with a manual transaxle, the starter
will not operate unless the clutch pedal is fully depressed
(Clutch interlock). This is a safety feature.
7. On vehicles with manual transaxle, place the gearshift
lever in the "N" (Neutral) position.
On vehicles with CVT or Twin Clutch SST, make sure the
selector lever (CVT) or the gearshift lever (Twin Clutch
SST) is in the "P" (PARK) position.
NOTE
On vehicles with continuously variable transmission
(CVT) or Twin Clutch SST, the starter will not operate
unless the selector lever (CVT) or the gearshift lever
(Twin Clutch SST) is in the "P" (PARK) position or the
selector lever (CVT) or the gearshift lever (Twin Clutch
SST) is in the "N" (NEUTRAL) position with the brake
pedal depressed.
For safety reasons, start the engine in the "P" (PARK)
position so that the wheels are locked.
8. Turn the emergency key with the F.A.S.T.-key to the
"ON" position and make certain that all warning lights
and warning displays are functioning properly before
starting the engine.
Features and controls
3
3-39