Mitsubishi LANCER Owner's Manual page 205

Features and controls
The Twin Clutch SST has 6 forward gears and 1 reverse gear.
The individual gears are selected automatically, depending on
the position of the gearshift lever, the speed of the vehicle and
the position of the accelerator pedal.
The gearshift lever (A) has 2 gates; the main shift gate (B) and
the manual shift gate (C).
3
NOTE
In the main shift gate, the gearshift lever has 4 positions.
For information on manual shift gate operation, please
refer to "Manual shift" on page 3-119.
3-110
The pull-ring (D) must be pulled up while the brake
pedal is depressed to move the gearshift lever.
The gearshift lever will move without pulling up the
pull-ring (D).
The pull-ring (D) must be pulled up to move the gear-
shift lever.