Mitsubishi LANCER Owner's Manual page 292

Changing the amount of time until "REST
REMINDER" is displayed
The amount of time until the display appears can be changed.
1. Press and hold the multi-information meter switch (for
about 2 seconds or more) to switch from the setting mode
screen to the menu screen.
Refer to "Changing the function settings (With ignition
switch in the "ON" position)" on page 3-187.
2. Lightly press the multi-information meter switch to select
"ALARM" (rest time setting).
Type 1
Type 2
3. Press and hold the multi-information meter switch (for
about 2 seconds or more) to display "ALARM" (rest time
setting).
N00557500121
Type 1
4. Lightly press the multi-information meter switch to select
the amount of time until the display appears.
5. Press and hold the multi-information meter switch (for
about 2 seconds or more) to change the setting to the
selected time.
NOTE
If the battery is disconnected, the memory of the unit set-
ting is erased and is automatically set to the "OFF".
The drive time is reset when the ignition switch is in the
"OFF" position.
Features and controls
Type 2
3-197
3