Mitsubishi LANCER Owner's Manual page 120

To turn from "LOCK (PUSH OFF)" to "ACC"
Turn slowly after pressing the ignition switch.
A- Steering wheel locked
B- Steering wheel lock released
NOTE
To turn the ignition switch from the "LOCK (PUSH
OFF)" position to the "ACC" position, push the ignition
switch again, turn the steering wheel in both directions
and then turn the ignition switch.
The ignition switch cannot be turned unless the F.A.S.T.-
key is inside the vehicle.
Refer to "Operating range for starting the engine" on page
3-20.
To turn from "ACC" to "LOCK"
N00513600021
For vehicles with manual transaxle
Slowly turn the ignition switch to the "LOCK" position while
pressing it.
For vehicles with continuously variable transmission
(CVT) or Twin Clutch SST (sportronic shift transmission)
First, set the selector lever (CVT) or the gearshift lever (Twin
Clutch SST) to the "P" (PARK) position, and then slowly turn
the ignition switch to the "LOCK" position while pressing it.
NOTE
For vehicle with CVT or Twin Clutch SST, the ignition
switch cannot be turned to the "LOCK" position unless
the selector lever (CVT) or the gearshift lever (Twin
Clutch SST) is in the "P" (PARK) position.
Features and controls
N00513700051
3
3-25